ACS712ELCTR-30A-T

The ACS712ELCTR-30A-T is an Allegro MicroSystems ACS712 fully integrated, Hall-effect-based linear current sensor IC with a ±30 A range, in an 8-pin SOIC package. The device consists of a precise, low-offset linear Hall circuit with a copper conduction path located near the surface of the die, so the current flows through a low-resistance internal conductor and the resulting magnetic field is sensed by the Hall IC and converted into a proportional voltage. The chopper-stabilized BiCMOS circuit is programmed for accuracy after packaging, which gives a low offset, a nearly zero magnetic hysteresis and a stable output over temperature, and the device provides a total output error of about 1.5 percent at 25 °C. The 30A version offers a sensitivity of 66 mV/A, the widest range of the family, so it measures the largest current but with the least resolution. It provides 2.4 kVRMS isolation between the current path and the signal path, an internal conductor resistance of about 1.2 mOhm to minimize power loss, a bandwidth up to 80 kHz and a 5 V single supply operation with a ratiometric output, over a -40 °C to +85 °C range. Typical uses include motor control, high-current load detection, switched-mode power supplies and overcurrent protection. Every sensor BeiLuo ships is factory-traceable and includes an import declaration, a certificate of origin and a RoHS compliance file. Our FAE team helps you choose the range and plan the isolation and layout.